Take a Closer Look
After connecting the power supply, press the ship type switch to start the machine
Please turn off the machine when you do not want to continous to print the models.
The temperature displayed is the current actual temperature (room temperature), and the one displayed as 0 is the preset temperature. When we set the temperature manually, the temperature we set will be displayed here
Manual temperature setting requires us to set the appropriate printing temperature. Automatic temperature setting mainly includes PLA and ABS options. If you select one of them, the machine will automatically start heating according to the temperature set by the program
Please refer to the leveling clip in our unpacking video.
Adjust the hot bed to the best state according to the leveling tutorial. Try to pass through the middle part of the hot bed with three pieces of A4 paper. If it can pass through, it means that the error of the hot bed is large, and a new hot bed plate needs to be replaced
Take off the hot bed plate separately, put it on the table, take a ruler to make it perpendicular to the hot bed plate, and then try to pass through the middle part of the hot bed with three pieces of A4 paper. If it can pass through, it means that the error of the hot bed is large, and a new hot bed plate needs to be replaced. Otherwise, the leveling problem is still leveling. You can contact the after-sales personnel for assistance
The prompt is that the machine reads the temperature error. It is likely that the print head/hot bed thermal line is defective or loose. You can re-plug and unplug the thermal line on the motherboard, or you can directly contact the after-sales for assistance.