Information
-
What are laser engraving and laser cutting?
Introduce about laser,laser engraving,laser cutting,features of laser engraving/cutting and lots of factors that affect the engraving effect.
-
Classification of common light sources for laser engraving machines
Use this section to explain a set of product features, to link to a series of pages, or to answer common questions.
-
Where can I get engraving/cutting models?
Introduce about methods to get laser engraving or cutting materials,including Internet search、download and so on.
-
Application of laser engraving/cutting in daily life
Introduce about application of laser engraving or cutting in daily life,including decoration、personalization and so on.
-
Safety protection of Falcon2
With the increase of laser power, laser safety protection can’t be underestimated. Creality Falcon2 can reduce your worries while creating.
-
What materials are suitable for engraving/cutting with Creality Falcon2?
Creality Falcon2 is suitable for engraving and cutting of most non-metallic materials (wood, bamboo, slate, cardboard, leather, fabric, paperboard, felt, ceramics, etc.),
Note:
1.Please ensure that the focal length of the laser module is correct and the lens of the laser module is clean when powered off(It can be clean with the dustless cloth and alcohol).
2.The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters:
Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect.In addition, engraving on brushed stainless steel can achieve colorful effects by setting different parameters, but the oxidation degree of different materials is different, and slight differences in focal length and power will also affect the actual effect.It is recommended to do some tests on your material.
3.The bottom surface of the cutting place should be suspended(use a honeycomb worktable) when cutting.You should protect the workbench (such as using aluminum plates or other materials that are not easily penetrated by laser).