CR-6 SE 3D Printer
CR-6 SE 3D Printer
CR-6 SE 3D Printer
CR-6 SE 3D Printer
CR-6 SE 3D Printer
CR-6 SE 3D Printer
CR-6 SE 3D Printer
CR-6 SE 3D Printer
CR-6 SE 3D Printer
CR-6 SE 3D Printer

CR-6 SE 3D Printer

$409.00 $409.00
Save $0.00
Get access to Creality first automatic leveling 3d printer CR-6 SE, over $4.3 Million Funds & 10K Backers Supported in Kickstarter.
Automatic Leveling
Integrated Design
Fast Assembly with Modularized Structure
Brand New Extrusion System
Noiseless Printing
Resume Printing and Filament Sensor equipped

Quantity

14-Day Return & Refund Service
100% Secure Checkout
Take a Closer Look

Integrated Design

Integrated design with high quality aluminum profile, Elegant and stable, Achieving a greater result for high-quality printing.

Ultra Silent Motherboard

Self-developed silent motherboard featured by a 25% decrease in decibel compared to peer products creates a cozy working environment.

Brand New Extrusion System

Redesigned extruder with a clip added, filaments’ feeding in is much easier and the feeding is smoother.

Automatic Leveling

The inventive bed leveling technology largely enhanced the speed as well as accuracy of leveling. With a strain gauge, 16-point leveling can be automatically completed in 48s

Take a Closer Look

CR-6 SE 3D Printer
Modeling Technology: FDM(Fused Deposition Modeling)
Printing Size: 235x235x250mm
File Formats: STL/OBJ/AMF
Slicer Software: Creality Slicer/Cura/Reptier-Host/Simplify3D
Print Speed: 80-100mm/s
Supported Materials: PLA/TPU/PETG/ABS/WOOD
File Transfer: USB/SD card
Machine Weight: 9.5KG
Motherboard: Silent motherboard
Nominal Voltage: 100v-240v AC 50/60HZ
Nominal Power: 350W
Output Voltage: DC24V
Operation: 4.3in color touch screen
Languages: Chinese/English
Layer Thickness: 0.1-0.4mm
XY Position Precision: 0.01mm
Print Resolution: ±0.1mm
Nozzle Temperature: ≤260℃
Nozzle Diameter: 0.4mm (more options supported)
Hotbed Temperature: ≤90℃
Creality Care+
Manual
Download
Open Source Plugins
Explore Now
CR Care+
Contact Us

FAQ

1. Heat the spray head to 230 degrees Celsius and keep the same temperature to remove the spray head kit; and then remove the heating block and throat separately. After removing, the spray head can heat to the lower temperature.

2. Prepare a bottle of red glue (available from Taobao), apply the red glue to the thread of the throat, let it rest for 1 minute, then reinstall the throat and heating block, and then install the nozzle kit back to the original Bit;

3. If there is still the same issue, please contact the after-sales customer service.

1. Please check whether the temperature display on the display is normal room temperature without giving the heating command. If it is not, it is likely to be a thermal problem, just replace with a new one;

2. Measure whether the output voltage of the hot bed port of the main board is 24V under heating. If there is no voltage, it is a main board problem and need to be replaced with a new main board. Otherwise, it is likely to be a problem with the hot bed board itself and need to be replaced.

Generally, it can be assembled in 5-10 minutes.

Please heat the nozzle to 200 degrees Celsius at first; then use cutting pliers to cut and straighten the front end of the filament at a 45-degree angle; and then open the extrusion clamp,  pass the filament into the extruder kit along the cut-off detection aperture;until the filaments flow out from the machine nozzle.

The machine has the function of continuous power off,  it can continue printing when the power is restored normally.

But the connection effect may not be very good, there is a certain chance that it will fail.