Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer
Ender-2 Pro 3D Printer

Ender-2 Pro 3D Printer

€149.00 €169.00
Save €20.00
Incl. VAT & Tarrif. Invoice Available.
Ender-2 Pro 3d printer is coming with 7 User-friendly Designs. Even for novices, you can get started quickly and let the creativity flow.
4-Step Assembly: 90% Pre-installed
Easy Operations: User-friendly Design
Light and Portable: Only 4.65kg net weight
DIY Refit: Fashionable Colors & Flexible Shaping
Built-in Power Supply: Safe and Reliable
Clip-on Screen: Simplified Installation and Dismantling

Quantity

American Express Mastercard PayPal Visa JCB Discover Diners Club
14-Day Return & Refund Service
100% Secure Checkout
12-Month Hassle-Free Warranty
Lifetime Customer Support
Take a Closer Look

Easy to Operate, Dare to Create

7 user-friendly design allows you quickly get started and let the creativity flow.

Quick Assembly in Four Steps

90% pre-installation needs only 7 screws to complete the rest of the assembly.

Light and Portable, Carry it Everywhere

Compact size, weighing only 4.65 kg. A well-designed handle is right there for easy carrying.

Built-in Power Supply

The integrated modular design comes with a built-in power supply to increase safety and reduce installation worries.

Compact Toolkit

Equipped with a tool box for storage and sorting, even a small screw will not be lost.

Safeguard the Print

The resume printing function enables a full recovery from power loss and can continue printing from where it's left off.

Magnetic Sticker Build Surface

The build surface has good adhesion and it's bendable to remove the print.

Belt Tensioner

A handy belt tensioner helps prevent layer shifting caused by inadequate tightness.

Take a Closer Look

Product Introduction

Ender-2 Pro 3D Printer
Modeling Technology: FDM(Fused Deposition Modeling)
Printer dimensions: 421 x 383 x 465 mm
Build size: 165 x 165 x 180 mm
Net weight: 4.65 kg
Leveling method: Manual leveling
Resume printing: Supported
Filament detector: No
Nozzle temperature: ≤ 260℃
Hotbed temperature: ≤ 80℃
Rated power: 150W
Supported filament: PLA/TPU/WOOD
Printing speed: ≤ 100 mm/s.
Extrusion method: Bowden extruder
Creality Care+
Manual
Download
Open Source Plugins
Explore Now
CR Care+
Contact Us

FAQ

1. Heat the spray head to 230 degrees Celsius and keep the same temperature to remove the spray head kit; and then remove the heating block and throat separately. After removing, the spray head can heat to the lower temperature.

2. Prepare a bottle of red glue (available from Taobao), apply the red glue to the thread of the throat, let it rest for 1 minute, then reinstall the throat and heating block, and then install the nozzle kit back to the original Bit;

3. If there is still the same issue, please contact the after-sales customer service.

1. Please check whether the temperature display on the display is normal room temperature without giving the heating command. If it is not, it is likely to be a thermal problem, just replace with a new one;

2. Measure whether the output voltage of the hot bed port of the main board is 24V under heating. If there is no voltage, it is a main board problem and need to be replaced with a new main board. Otherwise, it is likely to be a problem with the hot bed board itself and need to be replaced.

1. Slicing problem, the slicing is unsuccessful or not completely exported, just re-slicing or waiting for the export progress buffer to be completed.                                                           

2.The file transfer is interrupted during the SD card printing process, please replace the SD card or format it to have a try.                                                   

3.If it's still the same issue, please contact the after-sale customer service.

1. Clean the fan and check whether there is debris interference ;

2. Check whether the screws and fan cover are loose, and then re-fix it;

3. Check if the fan blade is damaged or broken, please replace a new fan.

Please heat the nozzle to 200 degrees Celsius at first; then use cutting pliers to cut and straighten the front end of the filament at a 45-degree angle; and then open the extrusion clamp,  pass the filament into the extruder kit along the cut-off detection aperture;until the filaments flow out from the machine nozzle.