FAQ
If you are pursuing efficiency and have higher cutting requirement, please choose the 40W option; if you do more engraving jobs and h ave lower demand for efficiency or cuttting capabilities, then the 22W is suitable for you. Specifically, the 40W can cut 18mm cherry wood, 15mm dark cpaque acrylic, and 0.1mm stainless steel in one pass.While the 22W can cut 10mm cherry wood, 8mm dark opaque acrylic, and 0.04mm stainless steel in one pass. However, the 22W has a smaller laser spot (0.08*0.1mm) than the 40W (0.08*0.12mm), which means it can produce finer engraving results.
Diode laser cuttable: paper, wood, leather, MDF, felt, some dark opaque acrylic.
Diode laser engravable: Paper, Wood, Leather, MDF, Stairless steel, Some dark opaque acrylic, Bamboo, Fabric, Dark glass, Ceramic, Jade, Marble, Shale, Cement, Brick, Platedd metal, Painted metal.
Sure, the 1.6W laser module is free if you choose the 40W to realize finer engraving as the 1.6W has a smaller laser spot.
There is a learning curve to being an expert. But engraving some begginner-level projects only takes a couple of tries to get skillful at it. Also, we have many tutorials and beginner guides on our YouTube Channel, whereyou can learn step-by-step projects!
The Falcon 2 is a open design and the glasses is neccessary when operating the laser engraver. However, the Faclon2 Pro is a fully enclosed design with a protective cover to offer a safer and easier working experience. Otherwise, the Falcon2 Pro comes with a built-in camera to realize the precise positioning and accurate alignment.
Take a Close Look
More about Falcon2 Pro
