SPARKX i7 Color Combo Only CA$399

Exclusive SPARKX i7 Offers

Creality Store
Home / Blog Center / CR Series 3D Printers Parameter Comparison

CR Series 3D Printers Parameter Comparison

all
2024-12-23 05:17:46

Here is CR series printers parameter comparison as below.

Model CR-6 Max CR-6 SE CR-10 V3 (Withdrawal) CR-10 Max CR-10 S5 (Withdrawal)

CP-01

(Three-in-one)
Image CR-6 Max CR-6 SE CR-10 V3 CR-10 Max CR-10 S5 CP-01
Release Date 2020.1 2020.7 2020.3 2019.5 Before 2019 2019.8
Build Volume (mm) 400*400*400 235*235*250 300*300*400 450*450*470 500*500*500 200*200*200
Product Dimensions (mm) 725*640*691 442*462*540 500*560*650 650*785*735 800*790*715 440*395*535
Package Dimensions (mm) 820*685*290 500*500*250 625*535*270 735*735*305 835*740*300 630*465*250
Net Weight (kg) 18.5 9.5 11.5 20 17.5 12.1
Gross Weight (kg) 22.7 12.25kg 14.3 24.8 22.6 15.26
Extruder Bowden Extruder Bowden Extruder Direct Drive Extruder Bowden Extruder Bowden Extruder Direct Drive Extruder
Supported Filaments PLA, TPU, PETG, PLA-Wood PLA, TPU, PETG, ABS, PLA-Wood PLA, TPU, PETG, ABS PLA, TPU, PETG, PLA-Wood
Gradient Color Filament, Copper-filled Filament		 PLA, Copper-filled Filament, PLA-Wood, Carbon Fiber, Gradient Color Filament PLA, ABS, TPU, PVA
Build Surface Carborundum Glass Plate Carborundum Glass Plate Carborundum Glass Plate Frosted Bed Sticker Carborundum Glass Plate Carborundum Glass Plate
Display Screen 4.3" Color Touch Screen 4.3" Color Touch Screen 12864 Monochrome Screen with Rotary Knob 4.3" Color Touch Screen 12864 Monochrome Screen with Rotary Knob 4.3" Color Touch Screen
Power Loss Recovery √ √ √ √ √ √
Filament Runout Sensor √ √ √ √ √ X
Dual Z-axis √ √ √ √ √ √
Auto Leveling √ (Strain Gauge) √ (Strain Gauge) X √ (BL-Touch) X X
Auxiliary Leveling X X √ √ √ √
Data Bus Width 32-bit 32-bit     8-bit  
Silent Mainboard √ √ √ √   √
Non-Silent Mainboard         √  
File Transfer SD Card, USB Cable SD Card, USB Cable TF Card, USB Cable SD Card, USB Cable TF Card, USB Cable SD Card, USB Cable
Max. Heatbed Temperature 90℃ 110℃ 100℃ 100℃ 60℃ 100℃
Max. Nozzle Temperature 260℃ 260℃ 250℃ 250℃ 250℃ 250℃
Rated Voltage 100-240V~ 100-120V~, 200-240V~ 100-120V~, 200-240V~ 100-240V~ 100-120V~, 200-240V~ 100-120V~, 200-240V~
Rated Power 500W 350W 350W 750W 270W 350W
Max. Printing Speed 100mm/s 100mm/s 100mm/s 100mm/s 100mm/s 100mm/s
Typical Printing Speed 50mm/s 50mm/s 50mm/s 50mm/s 50mm/s 50mm/s
Power Input Frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz
Output Voltage 24V 24V 24V 24V 12V 24V
Printing Technology FDM FDM FDM FDM FDM FDM
Extruder Count 1 1 1 1 1 1
Nozzle Diameter Standard 0.4mm Standard 0.4mm (Optional) Standard 0.4mm Standard 0.4mm Standard 0.4mm Standard 0.4mm
Layer Height 0.1-0.4mm 0.1-0.4mm 0.1-0.4mm 0.1-0.4mm 0.1-0.4mm 0.1-0.4mm
Printing Accuracy ±0.1mm ±0.1mm ±0.1mm ±0.1mm ±0.1mm ±0.1mm
Filament Diameter 1.75mm 1.75mm 1.75mm 1.75mm 1.75mm 1.75mm
File Formats STL, OBJ, AMF STL, OBJ, AMF STL, OBJ, AMF STL, OBJ, AMF STL, OBJ, AMF STL, OBJ, AMF
Slicing Software Creality Slicer, Cura, Repetier-Host, Simplify3D Creality Slicer, Cura, Repetier-Host, Simplify3D Creality Slicer, Cura, Repetier-Host, Simplify3D Creality Slicer, Cura, Repetier-Host, Simplify3D Creality Slicer, Cura, Repetier-Host, Simplify3D Creality Slicer, Cura, Repetier-Host, Simplify3D

 

Model CR-X Pro CR-30 CR-10S Pro V2(Withdrawal) CR-10 Smart CR-10 Smart Pro CR-M4
Image CR-X Pro CR-30 CR-10S Pro V2 CR-10 Smart CR-10 Smart Pro CR-M4
Release Date 2020.4 2021.3 2019.8 2021.6 2021.12 2023.2
Build Volume (mm) 300*300*400 200*170*Infinite 300*300*400 300*300*400 300*300*400 450*450*470
Product Dimensions (mm) 550*490*650 535*656*410 550*490*650 578*522*648 578*522*648 655*700*865mm
Package Dimensions (mm) 645*535*335 685*565*302 645*530*320 660*575*290 656*576*265 790*760*300mm
Net Weight (kg) 14.3 15.45 13.9 14 14 22.48kg
Gross Weight (kg) 20 19.14 17.4 17.3 16.9kg 28.3kg
Extruder Bowden Extruder Bowden Extruder Bowden Extruder Bowden Extruder Direct Drive Extruder Direct Drive Extruder
Supported Filaments PLA, ABS, PETG, TPU, PLA-Wood, Flexible Filament, Gradient Color Filament, Carbon Fiber PLA, TPU, PETG PLA, PLA-Wood, Flexible Filament, Carbon Fiber PLA, TPU, PETG, ABS PLA, TPU, PETG, ABS, PLA-Wood, PA, PC, Carbon Fiber PLA/PETG/TPU/ABS/PLA-Wood/PA(Nylon)/PLA-CF
Build Surface Carborundum Glass Plate Conveyor Belt + Roller Rack (optional) Carborundum Glass Plate Carborundum Glass Plate PEI Spring Steel Sheet + Magnetic Base PC Spring Steel Sheet + Magnetic Base
Display Screen 4.3" Color Touch Screen 12864 Monochrome Screen with Rotary Knob 4.3" Color Touch Screen 4.3" Color Touch Screen 4.3" Color Touch Screen 4.3" Color Touch Screen
Power Loss Recovery √ √ √ √ √ √
Filament Runout Sensor √ √ √ √ √ √
Dual Z-axis √ X √ √ √ √
Auto Leveling √ (BL-Touch) X √ (BL-Touch) √ (CR-Touch) √ (CR-Touch) √ (CR-Touch)
Auxiliary Leveling √ √ √ X √ √
Data Bus Width   32-bit   32-bit 32-bit 32-bit
Silent Mainboard √ √ √ √ √ √
File Transfer SD Card, USB Cable SD Card, USB Cable TF Card, USB Cable SD Card, WiFi, USB Cable SD Card, WiFi, USB Cable USB Drive, WiFi, USB Cable, RJ45
Max. Heatbed Temperature 100℃ 100℃ 100℃ 100℃ 100℃ 100℃
Max. Nozzle Temperature 250℃ 240℃ 250℃ 260℃ 300℃ 300℃
Rated Voltage 100-240V~ 100-120V~, 200-240V~ 100-240V~ 100-240V~ 100-240V~ 100-240V~
Rated Power 480W 350W 480W 350W 350W 800W
Max. Printing Speed 100mm/s 100mm/s 100mm/s 100mm/s 100mm/s 120mm/s
Typical Printing Speed 50mm/s 50mm/s 50mm/s 50mm/s 50mm/s 50mm/s
Power Input Frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz
Output Voltage 24V 24V 24V 24V 24V 24V (heatbed is powered independently)
Printing Technology FDM FDM FDM FDM FDM FDM
Extruder Count 1 1 1 1 1 1
Nozzle Diameter Standard 0.4mm Standard 0.4mm Standard 0.4mm Standard 0.4mm Standard 0.4mm Standard 0.4mm
Layer Height 0.1-0.4mm 0.1-0.4mm 0.1-0.4mm 0.1-0.4mm 0.1-0.4mm 0.05-0.35mm
Printing Accuracy ±0.1mm ±0.1mm ±0.1mm ±0.1mm ±0.1mm ±0.1mm
Filament Diameter 1.75mm 1.75mm 1.75mm 1.75mm 1.75mm 1.75mm
File Formats STL, OBJ, AMF STL, OBJ, AMF STL, OBJ, AMF STL, OBJ, AMF STL, OBJ, AMF STL, OBJ, AMF
Slicing Software Creality Slicer, Cura, Repetier-Host, Simplify3D Creality Slicer, Cura, Repetier-Host, Simplify3D Creality Slicer, Cura, Repetier-Host, Simplify3D Creality Slicer, Cura, Repetier-Host, Simplify3D Creality Slicer, Cura, Repetier-Host, Simplify3D Creality Print, Creality Slicer, Cura

 

Ender Series 3D Printers Parameter Comparison

Halot Series Resin Printers Parameter Comparison

    Share

Recent News

6 Halloween 3D Prints for a Cosy Canadian October
all
2026-10-19

6 Halloween 3D Prints for a Cosy Canadian October

A pumpkin by the door, a ghost on the bookshelf and a candy bowl that needs refilling suspiciousl...
Trick or Treat! Creality's Halloween Party Sale Extravaganza – A Haunting Deal is Coming!
all
2025-10-16

Trick or Treat! Creality's Halloween Party Sale Extravaganza – A Haunting Deal is Coming!

The leaves are falling, the nights are getting longer, and Halloween is just around the corner! C...
Advantages of laser engraving (low investment high return)
all
2024-12-23

Advantages of laser engraving (low investment high return)

In the era of entrepreneurship, many people will look for entrepreneurial opportunities. How abou...
Why do my printed 3D models have layers that crack or break?
all
2024-12-23

Why do my printed 3D models have layers that crack or break?

3D printed models are built by printing layer by layer. If the two layers do not adhere well to e...