Creality Resin 3D Printers Settings

2022-10-17 17:56:27

Resin is the easiest way to get started with 3D printing, but when it comes to Creality resin 3D printer settings, you may be confused, don't worry, we have prepared the corresponding resin settings here.

PLA-Based UV Curable Resin

Recommended Settings HALOT-ONE PRO HALOT-ONE PLUS HALOT-MAX HALOT-LITE HALOT-SKY HALOT-ONE LD-006
Layer thickness 0.05mm  0.05mm  0.05mm  0.05mm  0.05mm  0.05mm  0.05mm
Initial exposure 20s 20s 50s 60s 60s 70s 30s
Exposure time 2.5s 2.8s 2.5s 2.8s 2.8s 3.2s 2.4s
Turn off delay 1s 1s 1s 2s 2s 2s 0s
Rising height 7mm  7mm  7mm  7mm  7mm  7mm 5mm
Motor speed 3mm/s 3mm/s 1mm/s 5mm/s 5mm/s 5mm/s 60mm/min
Retract speed 3mm/s 3mm/s 1mm/s 5mm/s 5mm/s 5mm/s 150mm/min

Standard Rigid Resin Plus

Recommended Settings HALOT-ONE PRO HALOT-ONE PLUS HALOT-MAX HALOT-LITE HALOT-SKY HALOT-ONE LD-006
Layer thickness 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm
Initial exposure 20s 20s 50s 60s 60s 70s 30s
Exposure time 2.5s 2.8s 2.5s 2.8s 2.8s 3.2s 2.4s
Turn off delay 1s 1s 1s 2s 2s 2s 0s
Rising height 7mm 7mm 7mm 7mm 7mm 7mm 5mm
Motor speed 3mm/s 3mm/s 1mm/s 5mm/s 5mm/s 5mm/s 60mm/min
Retract speed 3mm/s 3mm/s 1mm/s 5mm/s 5mm/s 5mm/s 150mm/min

Standard Rigid Resin

Recommended Settings HALOT-ONE PRO HALOT-ONE PLUS HALOT-MAX HALOT-LITE HALOT-SKY HALOT-ONE LD-006
Layer thickness 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm
Initial exposure 20s 20s 40s 40s 40s 50s 30s
Exposure time 2.3s 2.5s 2.8s 3s 3s 3.2s 3s
Turn off delay 1s 1s 1s 2s 2s 2s 0s
Rising height 7mm 7mm 7mm 7mm 7mm 7mm 5mm
Motor speed 3mm/s 3mm/s 3mm/s 5mm/s 5mm/s 5mm/s  60mm/min
Retract speed 3mm/s 3mm/s 3mm/s  5mm/s  5mm/s  5mm/s 150mm/min

Low Odor Rigid Resin

Recommended Settings HALOT-ONE PRO HALOT-ONE PLUS HALOT-MAX HALOT-LITE HALOT-SKY HALOT-ONE LD-006
Layer thickness 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm
Initial exposure 20s 20s 40s 40s 40s 50s 30s
Exposure time 2.5s 2.8s 2.8s 3s 3s 3.2s 3s
Turn off delay 1s 1s 1s 2s 2s 2s 0s
Rising height 7mm 7mm 7mm 7mm 7mm 7mm 5mm
Motor speed 3mm/s 3mm/s 3mm/s 5mm/s 5mm/s 5mm/s  60mm/min
Retract speed 3mm/s 3mm/s 3mm/s  5mm/s  5mm/s  5mm/s 150mm/min

Water washable resin

Recommended Settings HALOT-ONE PRO HALOT-ONE PLUS HALOT-MAX HALOT-LITE HALOT-SKY HALOT-ONE LD-006
Layer thickness 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm
Initial exposure 20s 20s 40s 40s 40s 50s 30s
Exposure time 3.2s 3s 2.8s 3s 3s 3.2s 3s
Turn off delay 1s 1s 1s 2s 2s 2s 0s
Rising height 7mm 7mm 7mm 7mm 7mm 7mm 5mm
Motor speed 3mm/s 3mm/s 3mm/s 5mm/s 5mm/s 5mm/s  60mm/min
Retract speed 3mm/s 3mm/s 3mm/s 5mm/s 5mm/s 5mm/s 150mm/min

Water washable resin Plus

Recommended Settings HALOT-ONE PRO HALOT-ONE PLUS HALOT-MAX HALOT-LITE HALOT-SKY HALOT-ONE LD-006
Layer thickness 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm
Initial exposure 20s 20s 40s 50s 50s 50s 40s
Exposure time 2.5s 2s 2.5s 2.5s 2.5s 3s 2s
Turn off delay 1s 1s 1s 2s 2s 2s 0s
Rising height 7mm 7mm 7mm 7mm 7mm 7mm 5mm
Motor speed 3mm/s 3mm/s 3mm/s 5mm/s 5mm/s 5mm/s 60mm/min
Retract speed 3mm/s 3mm/s 3mm/s 5mm/s 5mm/s 5mm/s 150mm/min

Dental Model Resin

Recommended Settings HALOT-ONE PRO HALOT-ONE PLUS HALOT-MAX HALOT-LITE HALOT-SKY HALOT-ONE LD-006
Layer thickness 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm
Initial exposure 20s 20s 30s 40s 40s 50s 30s
Exposure time 2.3s 2.5s 2.5s 2.8s 2.8s 3.2s 2.4s
Turn off delay 1s 1s 3s 3s 3s 3s 3s
Rising height 7mm 7mm 7mm 7mm 7mm 7mm 5mm
Motor speed 1mm/s 1mm/s 1mm/s 5mm/s 5mm/s 5mm/s 60mm/min
Retract speed 3mm/s 3mm/s 1mm/s 5mm/s 5mm/s 5mm/s 150mm/min

Castable Jewelry Resin

Recommended Settings HALOT-ONE PRO HALOT-ONE PLUS HALOT-MAX HALOT-LITE HALOT-SKY HALOT-ONE LD-006
Layer thickness 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm
Initial exposure 65s 60s 65s 65s 65s 60s 50s
Exposure time 5.5s 5s 5.5s 5.5s 5.5s 5s 4s
Turn off delay 5s 5s 5s 5s 5s 5s 5s
Rising height 7mm 7mm 7mm 7mm 7mm 7mm 5mm
Motor speed 1mm/s 1mm/s 1mm/s 1mm/s 1mm/s 1mm/s 50mm/min
Retract speed 1mm/s 1mm/s 5mm/s 1mm/s 1mm/s 1mm/s 150mm/min

Dental Castable Resin

Recommended Settings HALOT-ONE PRO HALOT-ONE PLUS HALOT-MAX HALOT-LITE HALOT-SKY HALOT-ONE LD-006
Layer thickness 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm
Initial exposure 65s 60s 60s 65s 65s 60s 50s
Exposure time 5.5s 5s 6.5s 5.5s 5.5s 5s 4s
Turn off delay 5s 5s 5s 5s 5s 5s 5s
Rising height 7mm 7mm 7mm 7mm 7mm 7mm 5mm
Motor speed 1mm/s 1mm/s 1mm/s 1mm/s 1mm/s 1mm/s 50mm/min
Retract speed 1mm/s 1mm/s 1mm/s 1mm/s 1mm/s 1mm/s 150mm/min

High temperature Resin

Recommended Settings HALOT-ONE PRO HALOT-ONE PLUS HALOT-MAX HALOT-LITE HALOT-SKY HALOT-ONE LD-006
Layer thickness 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm
Initial exposure 50s 50s 50s 50s 50s 50s 30s
Exposure time 3.2s 2.8s 2.5s 2.8s 2.8s 3.2s 2.4s
Turn off delay 5s 5s 5s 5s 5s 5s 5s
Rising height 7mm 7mm 7mm 7mm 7mm 7mm 5mm
Motor speed 5mm/s 5mm/s 3mm/s 5mm/s 5mm/s 5mm/s 60mm/min
Retract speed 5mm/s 5mm/s 3mm/s 5mm/s 5mm/s 5mm/s 150mm/min

ABS Like Resin

Recommended Settings HALOT-ONE PRO HALOT-ONE PLUS HALOT-MAX HALOT-LITE HALOT-SKY HALOT-ONE LD-006
Layer thickness 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm
Initial exposure 20s 20s 40s 40s 40s 50s 30s
Exposure time 2.5s 2.8s 3s 3s 3s 3.2s 3s
Turn off delay 1s 1s 3s 2s 2s 2s 2s
Rising height 7mm 7mm 7mm 7mm 7mm 7mm 5mm
Motor speed 3mm/s 3mm/s 3mm/s 1mm/s 1mm/s 1mm/s 50mm/min
Retract speed 3mm/s 3mm/s 3mm/s 1mm/s 1mm/s 1mm/s 150mm/min

Toughness Resin

Recommended Settings HALOT-ONE PRO HALOT-ONE PLUS HALOT-MAX HALOT-LITE HALOT-SKY HALOT-ONE LD-006
Layer thickness 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm 0.05mm
Initial exposure 40s 40s 50s 60s 60s 50s 30s
Exposure time 3.2s 2.8s 3.2s 2.8s 2.8s 3.2s 2.4s
Turn off delay 1s 1s 3s 3s 3s 3s 3s
Rising height 7mm 7mm 7mm 7mm 7mm 7mm 5mm
Motor speed 1mm/s 1mm/s 1mm/s 1mm/s 1mm/s 1mm/s 50mm/min
Retract speed 3mm/s 3mm/s 1mm/s 1mm/s 1mm/s 1mm/s 150mm/min

Tips:
1. If using other brands of printers, refer to the table for printing parameters of printers with similar light intensities.
2. The exposure time of transparent color is slightly longer than other color resins in the same type of resin.

Big Sales: 50% off for HALOT-ONE & HALOT-LITE, don't miss out.

Creality Resin 3D Printers Settings
Recent News

Social Media
Facebook
LinkedIn
YouTube
Twitter
Instagram
Quora