Take a Closer Look
Greetings, greetings all. Love my 10w falcon. This thing exceeded my expectations like crazy. Works like a charm and so easy to build.
Did a little something for myself for a change. Engraved my stainless steel ciggy case. Surprised how crisp it came out!
100 Wedding Gifts, with a falcon 5W (I had to make 3 layers of 0.4mm wood). I cut the adhesive paper itself with my own laser. Besides, I made a custom keychain design for the friends of the couple that formed the figure of the meplee.
Coin clean test - 22w laser module Timelaps 5000 mm/min, 100%, crosshatch, airassist on
Canvas engraving test I think it's really beautiful
So 10w can leave some permanent marks on stainless steel. First test on stainless steel 150mm/min 85 percent, crosshatch , 0.5mm line interval , single pass.
Hey all! So I’ve been accepted into the group expert scene. A little about me, been laser working for 2 years, 3D printing for 6 years and cnc woodworking for 3 years. I’m a Jack of all trades. If you need help don’t hesitate to ask. Here are a few of my laser pieces I’ve done with my Creality device.
Will the falcon engrave on Acrylic?
I just received and setup my Falcon 10w. It comes with 2 different software. Grbl and light burn. I’m a total newbie to the jargon in GRBL, am I out of my league? And which software is easier to use?
Testimonials from Experts
Creality CR-Laser Falcon is a high-precision, intuitive laser engraver that is both affordable and easy to use.
www.all3dp.com
Creality CR-Laser Falcon Engraver review – NOT the “pew, pew!” kind of laser, but the kind of laser that makes cool stuff!
www.the-gadgeteer.com
Further developed and optimized based on the last generation, CR-Laser Falcon will surely impress users and add fun to life. For DIY enthusiasts, they should not miss it.
www.3dprintbeginner.com
The CR-Laser Falcon Engraver is surprisingly inexpensive. It’s even possible you may be able to make money using this device!
www.gsmarena.com
For ease of use, the CR-Laser Falcon also comes equipped with a preview function for lining up the laser lines before a job is commenced.It can be done for batch engraving builds with multiple parts, such as adding a logo to ten different surfaces at once.
www.makeuseof.com
The CR Laser Falcon is a table-top laser from Creality, a popular manufacturer of 3D printers, like the Ender 3 S1.
Author's name
Los Angeles, CA
Creality CR-Laser Falcon Makes it Easier Than Ever to Engrave and Cut a Masterpiece.
Author's name
Los Angeles, CA
Creality CR-Laser Falcon is a high-precision, intuitive laser engraver that is both affordable and easy to use.
www.all3dp.com
Creality CR-Laser Falcon Engraver review – NOT the “pew, pew!” kind of laser, but the kind of laser that makes cool stuff!
www.the-gadgeteer.com
Further developed and optimized based on the last generation, CR-Laser Falcon will surely impress users and add fun to life. For DIY enthusiasts, they should not miss it.
www.3dprintbeginner.com
The CR-Laser Falcon Engraver is surprisingly inexpensive. It’s even possible you may be able to make money using this device!
www.gsmarena.com
For ease of use, the CR-Laser Falcon also comes equipped with a preview function for lining up the laser lines before a job is commenced.It can be done for batch engraving builds with multiple parts, such as adding a logo to ten different surfaces at once.
www.makeuseof.com
The CR Laser Falcon is a table-top laser from Creality, a popular manufacturer of 3D printers, like the Ender 3 S1.
Author's name
Los Angeles, CA
Creality CR-Laser Falcon Makes it Easier Than Ever to Engrave and Cut a Masterpiece.
Author's name
Los Angeles, CA
FAQ
400mm*415mm
Semiconductor laser unit
It is convenient to measure the size of the object and assist in locating the engraving area.
It will stop working. The machine will be initialized when powered on.
The imported image should be clear. Make sure that focusing correctly before engraving and the power and speed are appropriate.
Check that the screws are tight and the belt is not too loose or too tight. The tightness of the belt is appropriate if the laser module can slide slowly on the X-axis profile perpendicular to the desktop by gravity and any pulley in the laser module has no empty sliding.
Ensure that the material to be engraved is flat. Observe the gradient on the machine to ensure that the machine is horizontal, and has been properly adjusted according to the operation method of the user manual.
The laser may penetrate the material and damage the workbench (especially when cutting). It is recommended to place objects on the bottom that cannot be penetrated by the laser, such as stainless steel plates, aluminum alloy plates, etc.
Please check if the TF card is inserted. The machine reads the latest engraving file(.gcode/.gc/.g/.nc/.ngc) in the root directory of the TF card by default. It is recommended to delete other engraving files in the root directory.
Take out the filter cotton directly when powered off. Clean it with water, dry it, and put it back (or replace it with a new one). Be careful not to touch the protective lens of the laser module.
In preview and engraving modes, if the machine turns on its side or moves, it will turn off the laser. The motor stops moving, the indicator light flashes, and the buzzer emits an alarm.
Solution: Please move the machine to its original position and press the microswitch on the control box to continue previewing or engraving after clearing abnormality (The microswitch only works during offline working).