Product Introduction
Take a Closer Look
Testimonials from Experts
I’m pleasantly surprised with Creality CR-6 SE 3D printer. It’s a step up from earlier Creality offerings, is relatively easy to use, and dependable. It’s a value for money machine that is an improved version of an Ender with some better components. Safety features, an improved extruder, and a better feeder make this a better printer, suited for beginners and everyday use.
www.3dprint.com
The Creality CR-6 SE is packed with useful features. It is virtually an improved Ender 3 V2 and offers even more reliable operation. The time between unboxing and the first 3D print is extremely short. It was hard to find negative points in the practical test! If you’re looking for a 3D printer that will get you good results quickly, the Creality CR-6 SE is the one for you. With excellent auto-leveling, a sleek design, and many quality-of-life features, it looks very professional and rarely if ever gives you problems.
www.the3dprinterbee.com
I’m sure you won’t regret going with the Creality Ender CR-6 SE either for your first purchase or to add to a wonderful collection of 3D printers. You can expect several thousand hours of printing with this printer and for the price and performance we’ve already seen in many review videos, along with the extensive feature list, this is one that I know everyone will be happy with.
www.3dprinterly.com
I think the CR-6 SE is a good printer. The whole experience with the printer was excellent and I didn’t encounter any failures with any of my prints.Leveling was excellent and the CR-6 SE gained my trust where I can just start a print and leave, without having to watch the first layer to make sure it’s fine. Not a lot of printers can consistently do that.
www.3dprintbeginner.com
Probably the most noteworthy feature on the Creality CR-6 SE is the automatic platform leveling. Where on most Creality 3D printers you would have to make do with manually leveling via a sheet of paper, the force-based sensor on the CR-6 SE promises hassle-free automatic bed leveling. Having a truly leveled print surface greatly improves bed adhesion and print quality overall, with much less hassle.
www.all3dp.com
I’m pleasantly surprised with Creality CR-6 SE 3D printer. It’s a step up from earlier Creality offerings, is relatively easy to use, and dependable. It’s a value for money machine that is an improved version of an Ender with some better components. Safety features, an improved extruder, and a better feeder make this a better printer, suited for beginners and everyday use.
www.3dprint.com
The Creality CR-6 SE is packed with useful features. It is virtually an improved Ender 3 V2 and offers even more reliable operation. The time between unboxing and the first 3D print is extremely short. It was hard to find negative points in the practical test! If you’re looking for a 3D printer that will get you good results quickly, the Creality CR-6 SE is the one for you. With excellent auto-leveling, a sleek design, and many quality-of-life features, it looks very professional and rarely if ever gives you problems.
www.the3dprinterbee.com
I’m sure you won’t regret going with the Creality Ender CR-6 SE either for your first purchase or to add to a wonderful collection of 3D printers. You can expect several thousand hours of printing with this printer and for the price and performance we’ve already seen in many review videos, along with the extensive feature list, this is one that I know everyone will be happy with.
www.3dprinterly.com
I think the CR-6 SE is a good printer. The whole experience with the printer was excellent and I didn’t encounter any failures with any of my prints.Leveling was excellent and the CR-6 SE gained my trust where I can just start a print and leave, without having to watch the first layer to make sure it’s fine. Not a lot of printers can consistently do that.
www.3dprintbeginner.com
Our brands
FAQ
1. Heat the spray head to 230 degrees Celsius and keep the same temperature to remove the spray head kit; and then remove the heating block and throat separately. After removing, the spray head can heat to the lower temperature.
2. Prepare a bottle of red glue (available from Taobao), apply the red glue to the thread of the throat, let it rest for 1 minute, then reinstall the throat and heating block, and then install the nozzle kit back to the original Bit;
3. If there is still the same issue, please contact the after-sales customer service.
1. Please check whether the temperature display on the display is normal room temperature without giving the heating command. If it is not, it is likely to be a thermal problem, just replace with a new one;
2. Measure whether the output voltage of the hot bed port of the main board is 24V under heating. If there is no voltage, it is a main board problem and need to be replaced with a new main board. Otherwise, it is likely to be a problem with the hot bed board itself and need to be replaced.
Generally, it can be assembled in 5-10 minutes.
Please heat the nozzle to 200 degrees Celsius at first; then use cutting pliers to cut and straighten the front end of the filament at a 45-degree angle; and then open the extrusion clamp, pass the filament into the extruder kit along the cut-off detection aperture;until the filaments flow out from the machine nozzle.
The machine has the function of continuous power off, it can continue printing when the power is restored normally.
But the connection effect may not be very good, there is a certain chance that it will fail.
Probably the most noteworthy feature on the Creality CR-6 SE is the automatic platform leveling. Where on most Creality 3D printers you would have to make do with manually leveling via a sheet of paper, the force-based sensor on the CR-6 SE promises hassle-free automatic bed leveling. Having a truly leveled print surface greatly improves bed adhesion and print quality overall, with much less hassle.
www.all3dp.com