Creality K1 Max 3D Printer: Speedy. Smart. Super $899.00
(Save an extra $130 on blog only，amazing price on combo)
【Rapid Printing: 600mm/s Speed 20000mm/s² Acceleration】
【Max Capacity 300x300x300mm, Efficient Use of Space】
【AI-assisted Carefree Printing: AI Camera & LiDAR】
【Ceramic Heater Encircles the Hotend: Max. 32mm³/s Flow】
【Core XY Nimble Setup for Speed: Agile and Swift】
【Handles temp up to 300℃ & Has an air purifier】
Creality K1 Max Mainboard Replacement
2024-01-05 08:53:51
Creality K1 Max Mainboard Replacement
If you're looking to elevate your Creality K1 Max's capabilities or replacing a malfunctioning mainboard, follow these straightforward steps for a hassle-free Mainboard Replacement.
K1 Max AI Fast 3D Printer
1. Power Down and Disconnect
Ensure the machine is turned off, and unplug the power cord for safety.
2. Remove Foot Pads and Securing Screws
Utilize the provided hex wrench to remove four-foot pads and two securing screws.
3. Detach Mainboard Fan Cable and Remove Cover
Carefully disconnect the mainboard fan cable and remove the cover. Exercise caution to avoid pulling on the fan cable and handle it delicately to prevent damage.
4. Disconnect Wires and Remove Screws
Disconnect all wires on the mainboard and remove the four screws securing it.
5. Replace with New Mainboard
Take out the faulty mainboard and replace it with the new one. Secure the new mainboard by tightening the four screws.
6. Wiring Connection
Refer to the wiring diagram provided for seamless connection of wires.
7. Reattach Mainboard Fan Connector and Install Bottom Cover
Plug in the mainboard fan connector and carefully install the bottom cover, ensuring proper routing of the mainboard fan cable.
8. Secure Bottom Cover and Reinstall Foot Pads
Tighten the two screws to secure the bottom cover, and then reinstall the four-foot pads.
9. Power Up and Inspect
Plug in the power cord and turn on the machine for a thorough inspection, ensuring the successful replacement of the mainboard.
With these clear steps, upgrading or replacing the mainboard in your Creality K1 Max becomes a straightforward process.
Recent News
Social Media
