Top 10 3D Screen Printing Squeegee Projects
If you're searching for the appropriate 3D screen printing squeegee project? When starting a printing business or having difficulties in workspace organization, one can find a lot of different squeegees and necessary accessories made by 3D printing.
These models are helpful solutions – from specific handles and blade holders to convenient racks and hangers.
Today's article showcased 10 of the best squeegee-related 3D print projects to improve your screen printing game.
So let the following patterns that are more innovative and functional, helpful to smoothen some projects, described below:
Top 10 3D Screen Printing Squeegee Projects
No 1. SQUEEGEE 3D MODEL
Where to find it? cults3d
The squeegee 3D model is an efficient and functional design ideal for undertaking tasks such as wiping away ice from automobile glass or any other ordinary cleaning process.
This high poly model is for 3D printing and has PBR textures baked at 2k for enhanced further detail. It has a polycount of 2444, which is efficient while coming out nicely.
Coming in formats including Blender, STL, OBJ, and many others, it is easy to use in many different projects. CGHawk has designed it, and it is both safe and universal.
No 2. SQUEEGEE FOR UNIVERSAL TOOL HANDLE
Where to find it? Cults
This squeegee tool fits the Universal Tool Handle, accompanies Unger squeegee rubber, and may be used for showers or windows.
The bad news is that it is designed for extension poles with cone adaptors and may be compatible with Optiloc.
The parts fit with a tight tolerance and friction, and the 20cm channel is more than practical.
However, this can be adjusted according to needs and wants. When printing, try to use a raft to ensure you avoid some of these problems, and when it comes to infilling 10% with a layer height of 0.24, it will ensure the object's durability is achieved.
No 3. Screen Printing Squeegee Blade Holder (Racle Sérigraphie)
Where to find it? thingiverse
This 3d screen printing squeegee blade holder is a practical improvement over warped wooden holders, preserving the blade.
For the frame, you will require two M4 x 25mm screws which should be resized to 23mm to avoid putting too much pressure on the screen and two M4 nuts.
Depending on the printer type, you will need about 100g of PLA or ABS filament.
PLA likewise brings preference because the material can withstand screen printing solvents and is environmentally friendly. The holder secures blades tightly once 4mm holes' have been drilled.
With an XY precision of 0.11mm, the methodology includes a 0.2mm layer height, 20% infill density, no rafts, and no support. I love making bright screenprints, and they are easy to assemble.
No 4. Screen Print Squeegee Holder-Organizer
Where to find it? thingiverse
This squeegee holder is specifically designed for wooden screen print squeegees, and the best part is that it is printable in 3D.
Made with this in mind, it is compatible with PLA filament, regardless of color or brand. This leaves a strong and durable final product, printed at 0.3mm resolution and 50% infill.
There are no support nodes, which means the process is more straightforward. For proper fitment of your squeegees, use horizontal expansion adjustment.
This organizer makes your tools well-sorted and easily accessible, making your screen-printing work even more convenient!
No 5. Shower Squeegee Holder: 3D-Printed Lilnaggenn Hanger for IKEA, Sup
Where to find it? MakerWorld
This is a 3D-printed hanger suitable for the IKEA LILLNAGGEN shower squeegee.
3d screen printing squeegee is designed to look great and fit properly on your shower screen, so you always have your squeegee within reach.
In the corners, there are grooves that allow the hanger to adjust to the width of the shower screen. It prints quickly without requiring support and is practical and long-lasting.
Make your bathroom organization better with this helpful storage tool designed for daily use.
No 6. REPLACEMENT HANDLE BATHROOM SQUEEGEE WINDOW SQUEEGEE PULLER
Where to find it? cults3d
This alternative handle has been 3D printed to extend the usability of a window squeegee.
Rather than having a broken handle or one that has worn out, with this model, you get a strong replacement solution. It is reproducible and works well with most average squeegees, so it is perfect for extending cleaning tool longevity.
Releasing it for the public on December 25, 2023, this design will allow you to be efficient in cleaning without requiring the replacement of your entire squeegee.
No 7. Squeegee Bracket
Where to find it? thingiverse
This convenient 3D printed bracket is meaningful for screen printing companies and gives them a place to park their squeegee while printing.
It clamps securely to aluminum frames and comes in two sizes: 1.5 inches square and 1.38 inches square. You can cut it to a bigger frame size as you deem fit in as much as you make a required frame size.
Therefore, the bracket cooperates with 0, 5-inch wooden dowels to connect two pieces, which can be purchased in the store or created independently.
It was printed on a Creality Ender 3 Pro printer, and the material is hard and good enough to ensure proper slicing.
No 8. TPU Blade Squeegee
Where to find it? printables
If you apply films, stickers, and sheets on flat surfaces, this flexible 3d screen printing squeegee is the best for the job.
To repaint the old PEI sheets, the rollers apply even pressure distribution inspired by silk-screening tools.
This blade is made from TPU filament and has 100% infill, making it both durable and easy to apply to the material.
It has a dimension of 110 x 110 mm, and the size can be accommodated to cover broader needs through the enlargement of the print.
The grip is printed with PLA filament with a layer height of 0.25mm and three perimeters. It is a valuable instrument for point work.
No 9. Screen Printing Squeegee Rack
Where to find it? thingiverse
This rack design is simple, easy on the pocket, and highly functional for storing screen printing squeegees.
Made to sit one pair on top of the other to take up less space, this tool has a unique function to help you organize your squeegee and keep your storage neat and motley.
Printed in PLA and requiring no raft or support structure, this sturdy rack is an easy print.
When it comes to showing or simply using the squeegees for fun as a hobby, this rack will be handy for neatly aligning the pieces and being equally fastened for use.
No 10. Screen Printing Squeegee
Where to find it? thingiverse
This 3d screen printing squeegee is ideal for those who do not want to spend on commercial squeegees.
Specifically built to be robust, it is printed with a 100% infill for optimal resilience. You can extend it to the size you need; however, try not to make it too small if it is efficient.
Whether you are involved in a small home screen printing job or trying to meet the commercial needs of a business, this specially designed squeegee comes in handy at a lower cost.
The model is realized using Evergreen, which has a Creative Commons Attribution license to make it easy to use and adapt.
Conclusion
These top 10 3D screen printing squeegee projects offer helpful guidance on how to fix your screen print issues.
They are also very functional and should benefit everyone, from the occasional fans to the proper professional who needs to expand their stock.
Read more if you are interested in:
Recent News
8 Halloween 3D Print Ideas to Make Before October 31
Ender Series 3D Printers Parameter Comparison
Creality Back-to-School Sale 2026: Save Up to 50% on 3D Printers and More
