K1 Max Front Glass Door Replacement

Creality collects feedback from users after the launch of K1 Max and actively provides them with satisfactory solutions. For example:

Packaging Enhancements : Upgraded the K1 Max packaging with 4*4*4 corner guards and added foam protection on all sides.

Improved Front Door Glass : Added an explosion-proof film to the front door glass to prevent shattering into dangerous shards.

Heabed Upgrade : Strengthened the heatbed's sheet metal, added readable information, and enhanced its aesthetic design.

Extruder Improvements : Replaced the dynamic claw joint with a pneumatic joint for a better user experience and added a compression spring to the extruder to increase extrusion force.

XY Motor Adjustments : Switched from a 4260 large gear motor to a 4248 small gear motor on the XY axis, reducing model vibration.

Hotend Refinements : Integrated the split hot end module with the throat nozzle , reducing clogging and making nozzle replacement and maintenance easier.

Now, please follow the step-by-step tutorial to replace the K1 Max front glass door .

Note: Add Preparation Tools and Clear Glass Residue Steps

Use an internal hexagonal wrench to remove the two screws at the upper hinge of the front door. Hold the front door and lift the front door diagonally upwards to remove it. Separately thread the 4 flat head screws from the kit into the nylon spacers.

Insert two pre-threaded screws with washers into the mounting holes at the bottom of the new glass front door, and align the screw holes of the front door lower mounting part with the fixed position on the glass, then tighten the screws. Insert the hinge of the front door lower mounting part into the mounting hole on the base, insert the front door upper mounting part with pad into the mounting hole on the top shell of the machine, close the front door, secure the front door upper mounting part into the upper slot of the front door glass, take two additional pre-threaded screws with washers, insert them through the front door mounting holes, and tighten them on the front door mounting part. Insert two flat-head self-tapping screws into the nylon washers, align the mounting surface of the door handle with the front face of the front door, align with the mounting holes, and use an Allen wrench to tighten the self-tapping screws one at a time to secure the front door handle. If you are a DIY enthusiast, you can also look for K1 Max door free cut files and matching materials online to make a K1 Max front door.

K1 Max Front Glass Door Replacement

Recent News

Top 10 3D Screen Printing Squeegee Projects

K1 or K1 SE or K1C: What Should You Buy?

How to 3D Print Brass Successfully

Aluminum 3D Printing: All You Need to Know