Step-by-Step Guide to Configuring OctoPrint for the Ender 3 Series (V2, Pro, S1)
OctoPrint is a free, open-source software created by Gina Häußge in 2012 to simplify and enhance 3D printing. With OctoPrint, users can remotely manage their printer's functions, like temperature and movement, by sending G-code to the printer's firmware.
Compatible with numerous printers, including the affordable and upgradeable Creality Ender 3 series , OctoPrint adds functionality through plug-ins. This guide will cover the setup process for OctoPrint on Ender 3 models and the essentials needed for installation.

Requirements
- Raspberry Pi (3B/3B+/4 recommended) with power supply.
- MicroSD card (8GB or larger).
- Ender 3 (V2/Pro/S1) 3D printer
- USB cable (usually a USB Type B to USB Type A)
- Computer with internet access
- Webcam (optional, for monitoring prints)
Step 1: Download and Install OctoPi
- Go to the OctoPrint website and download the latest version of the OctoPi image.
- Use a program like balenaEtcher or Raspberry Pi Imager to flash the OctoPi image onto the MicroSD card.
- Once the image is flashed, eject the MicroSD card from your computer.
Step 2: Configure Wi-Fi

- Before inserting the MicroSD card into your Raspberry Pi, you'll need to set up Wi-Fi.
- Insert the MicroSD card into your computer and navigate to the `boot` partition.
- Find the file `octopi-wpa-supplicant.txt` and open it with a text editor.
- Uncomment and fill in your Wi-Fi network's SSID and password. Make sure to select the correct Wi-Fi country code.
- Save the changes and safely eject the MicroSD card.
Step 3: Set Up Raspberry Pi
- Insert the MicroSD card into the Raspberry Pi.
- Connect the Raspberry Pi to your Ender 3 using the USB cable.
- Power on the Raspberry Pi.
- Wait for the Raspberry Pi to boot up and connect to your Wi-Fi network.
Step 4: Access OctoPrint
- On your computer, open a web browser and go to http://octopi.local or the IP address of your Raspberry Pi (you can find this in your router's DHCP client list or by using a network scanner).
- The first time you access OctoPrint, you'll be greeted with a setup wizard. Follow the steps to set up a username and password, configure printer profiles, and adjust settings as needed.
Step 5: Connect OctoPrint to Your Printer
- If the Ender 3 is not automatically recognized, go to the Connection section of the OctoPrint interface.
- Select the correct serial port and baud rate (115200 for most Ender 3 models).
- Click "Connect" to establish a connection between OctoPrint and your Ender 3.
Step 6: Fine-Tuning and Plugins
- You can now use OctoPrint to control your printer, start prints, and monitor progress.
- Consider installing plugins via the OctoPrint interface for additional functionality, like OctoLapse for creating timelapse videos or Bed Visualizer for bed leveling assistance.
- If you have a webcam, you can set it up through the settings to monitor your prints remotely.
Step 7: Safety and Security
- Change the default password to secure your OctoPrint instance.
- Consider setting up access control and webcam stream access if you plan to access OctoPrint over the internet.
- Make sure to keep your OctoPrint instance updated to the latest version for security and stability improvements.
Conclusion
Remember to never leave your 3D printer unattended for extended periods, especially when printing remotely with OctoPrint, as it does not prevent potential hazards associated with 3D printing.
Follow these steps carefully, and you should have a fully functional OctoPrint setup for your Ender 3 (V2/Pro/S1) that will make printing and monitoring your 3D prints much easier and more convenient.
Recent News

8 Halloween 3D Print Ideas to Make Before October 31

Ender Series 3D Printers Parameter Comparison

Creality Back-to-School Sale 2026: Save Up to 50% on 3D Printers and More



