Home / Blog Center / Creality K2 Plus & CFS Combo Presale

Creality K2 Plus & CFS Combo Presale

all

2024-12-23 04:57:55

K2 Plus is a large-format, multi-color, high-speed intelligent 3D printer launched by Creality, making its debut during the brand's tenth anniversary celebration. The first round of pre-sales will start in June 2024, and after six months of improvements and upgrades, the model will restart pre-sales on Nov. 11. For more details, you can visit the product page or join the official Creality live stream.

K2 Plus Combo 3D Printer

K2 Plus Combo 3D Printer: $1499.00
Extra 3% off on K2 Plus Combo with code K1EM

【CFS: Multi-Color Printing, Up to 16 Colors Using 4 CFS】
【Next-gen Direct Drive Extruder】
【FOC Closed-Loop Motors: Speedy & Quiet】
【350*350*350mm Build Volume】
【Active Chamber Heater】

VIEW DEAL

K2 Plus Key Innovations

350350350mm Build Volume

K2 Plus Multi-Color Print

The 350*350*350mm print size not only meets large model requirements, but also reduces average waste when printing small models in batches.

CFS (Creality Filament System) - Multi-Color Printing

The K2 Plus Combo is equipped with a CFS (Creality Filament System) multi-colour printing system, which supports RFID identification of filaments and can be expanded to a maximum of 4, i.e. it supports automatic switching of 16 rolls of different colours, water-soluble filaments, etc. The CFS supports multi-colour printing, automatic material supply, automatic material supply and take-up functions, and can easily handle the printing of a single large model of 3kg.

Sturdy "Matrix" Frame

Sturdy

The frame is made of all-metal one-piece die casting, which ensures the reliability of the fuselage and the stability of the high-intensity printing process over a long period of time; the use of one-piece die casting and greatly reduces the difficulty of assembly in the factory, and reduces the number of parts from dozens of original parts to four, which guarantees the quality of production from the design side.

Next-gen Direct Drive Extruder

K2 Plus Next-gen Direct Drive Extruder

The K2 Plus extruder introduces a servo motor for the first time, integrating an AI calibration camera and real-time dynamic heat control, significantly reducing the risk of filament jamming. Its uniquely simple cutter design uses a magnet-driven mechanism instead of springs, extending cutter life. The extruder cover attaches magnetically, and upon opening, a small green dot on the extruder gear provides easy monitoring of extrusion status. The machine’s back panel features a prominent waste extrusion area alongside a silicone nozzle wiper, and there’s a nozzle-wiping zone on the heated bed. Together, these ensure precise nozzle positioning relative to the bed after each reset.

Servo step extruder low heat, not easy to jam the material plugging
Hardened steel nozzle in one-piece throat
Easy maintenance design
Material breakage detection
Integrated cutter
Integrated level sensor
Maximum flow rate 40 mm³/s

Incredibly Quiet, While Printing Hard

The whole body adopts 5 servo stepping motors, with excellent FOC algorithm control and low-noise fan design, so that the average noise level of the whole machine is only 48dB when printing, and quietly integrates into the working environment.

Note: In the case of monochrome printing, the noise level under the standard printing speed ≤ 45dB [no need to reduce the speed of printing].

Step-servo Motor System

K2 Plus Step-servo Motor System

Improved CoreXY structure with high-precision servo stepper motors, while the Z-axis adopts an independent double-Z structure with two servo stepper motors, up to 600 mm/s, acceleration up to 30,000 mm/s², and the maximum nozzle flow rate is 40 mm³/s.

Adoption of proprietary high-precision industrial servo motors, which is the only technology used in the industry for consumer FDM3D printers such as the K2 Plus.

The FOC system is based on real-time motor position feedback, with high dynamic response capability, using high-frequency PWM current pulse, constantly adjusting the motor state, how much torque the motor needs, how much electrical energy is input, in order to ensure accurate movement, but also to maintain a relatively low average load.

Servo motor for XYZ: low noise, no step loss.
Servo motor for extruder: low heat generation, no jamming.

Feature	FOC Step-servo Motor (Only K2 Plus)	Closed-loop Motor	Open-loop Motor
Control method	FOC+position, speed, current loops	Position loop + Step subdivisions	Step Subdivisions
Electric Current	adaptive electric current, high efficiency	Fixed electric current, low efficiency	Fixed electric current, low efficiency
Thermal Runaway	low thermal runaway	high thermal runaway	high thermal runaway
Acceleration	Quick acceleration	Limited acceleration	Limited acceleration
Torque	Strong torque at a given power input	Weak torque at a given power input	Weak torque at a given power input
Torque	Little torque loss at high speed	Big torque loss at high speed	Big torque loss at high speed
Speed	Higher top speed	Regular top speed	Regular top speed
Noise	Low noise	Loud noise	Loud noise
Step loss	No	No	Yes
Positioning accuracy	High accuracy related to encoder	High accuracy related to encoder	Normal accuracy related to step subdivisions
Positioning accuracy	High accuracy despite structural resistance	Impaired accuracy due to structural resistance	Impaired accuracy due to structural resistance

Intelligent - AI Tech

K2 pLUS Intelligent - AI Tech

The K2 Plus integrates a variety of intelligent features, including automatic leveling, AI calibration, intelligent vibration pattern optimization and active belt tension, remote operation and monitoring, etc. These features allow users to easily control the printer from a computer or cell phone and monitor it in real time to ensure that print jobs are completed smoothly.

In addition, the K2 Plus is equipped with an AI detection function that will detect whether the platform is correctly placed and whether there are any other items or models on the platform before printing, and intelligently detects accidents such as jamming, tangling, and blanking during the printing process, and automatically pauses the job to remind the user of manual intervention.

Others

The XY axis control system is equipped with an active belt tensioning module (consisting of a tensioning motor and pressure sensor) to ensure that the belt tension is in the optimal range, improving the extrusion head's operational stability and thus optimizing the model's vibration pattern performance.
The hinged door design of the K2 Plus allows for a larger opening angle (145°) and reduces the risk of glass door breakage due to excessive force.
K2 Plus has a total of 6 cooling/heating fans, which can realize active chamber temperature thermostat control.
Support multiple networking methods (2.4/5g Wifi, RJ45, LAN), support USB stick.
32GB internal storage

CFS (Creality Filament System) - Multi-color, Intelligent, Easy to Use

Creality CFS (Creality Filament System)

The CFS is an intelligent filament management system that handles filament storage, management, and automatic feeding and refeeding, enabling seamless multi-color printing and automatic refills.

Equipped with over ten sensors, CFS monitors filament conditions, detecting issues like feeding failures, tray jams, or filament tangles to ensure smooth printing.

While CFS lacks an active drying function, it can maintain filament freshness with desiccants. Since users aren’t printing most of the time, we prioritized effective storage over built-in drying to keep costs manageable. Adding active drying would have significantly raised the product's price.

The CFS connects directly to the K2 Plus via a 485 cable, which serves both data and power functions, eliminating the need for an additional power supply. A single CFS unit can expand up to four groups for larger setups.

The software mix is renewed across the board. The latest Creality OS supports multi-filament management. The Creality Print 5.1 has been fully upgraded with support for 3MF format, multi-color slicing, over 40 built-in material presets, and remote machine management capabilities. The Creality Cloud APP offers even better 3D models and features.

Committed to pushing the limits of imagination, the K2 Plus Combo redefines the experience of desktop 3D printing. K2 Plus Combo is now available in the Creality official stores online. Here are the links: