Top 15 Innovative DJI Landing 3D Print Ideas

.shop-list { margin: 0 auto; width: 800px; } .shop-wrap { display: flex; flex-wrap: wrap; padding-bottom: 20px; border-bottom: 1px solid #A6A6A6; } .shop-img { width: 200px; } .text-content { flex: 1; } .btn-wrap { width: 100%; margin-top: 14px; display: flex; justify-content: flex-end; } .shop-btn { width: 120px; height: 28px; text-align: center; line-height: 28px; background-color: #D8383B; color: #ffffff; font-size: 15px; font-weight: 500; } .shop-title { width: 480px; text-align: center; margin: 0 auto; background-color: #d8383b; color: #fff; padding: 1px 75px; font-size: 15px; font-weight: 500; } .line { width: 100%; height: 3px; background-color: #D8383B; margin-bottom: 14px; } .text-link { font-size: 16px; font-weight: bold; color: #1C2AA3; } Ever had your drone come down with a bit of a bump? We’ve all been there—flying high, admiring the view, then trying to land smoothly, only to end up with an ungraceful plop. Drones are incredible for capturing photos and video, but they’re also fragile.

Like a kitten in a rainstorm, they don’t always fare well when it’s time to touch down. Luckily, 3D printing has opened up a world of possibilities for upgrading and customizing drone landing gear.

Whether it’s to improve stability, add height, or just make your drone look cooler, you can now print upgrades that make landing smoother and safer.With a Creality 3D printer handy, you can explore these awesome ideas for landing gear mods that’ll make every touchdown a success. Each of these ideas is practical and fun, and they add a layer of protection for your investment.

Let’s dive into the top 15 3D print ideas to take your DJI drone landings to the next level!

K2 Plus Combo 3D Printer K2 Plus Combo 3D Printer: $1499.00 【Multi-Color Printing】 【Direct Drive Extruder】 【FOC Closed-Loop Motors】 【350*350*350mm Build Volume】 【Active Chamber Heater】 VIEW DEAL Top 15 Innovative DJI Landing 3D Print Ideas 1. DJI Phantom Landing Gear Legs Upgrade Mod

Starting with the basics, this landing gear mod for the DJI Phantom is a fantastic way to improve stability. The DJI Phantom series is well-loved, but its landing legs can be a bit on the fragile side.

This 3D print mod is designed to make them sturdier and better equipped for various landing surfaces. You won’t have to cringe as your Phantom wobbles on impact; these reinforced legs provide a steady base.

This mod is easy to print and install. It’s a beginner-friendly upgrade, so even if you’re new to 3D printing, you can likely tackle this one without too much trouble. Just download the model file, print, and attach. These legs will add a touch of durability to your Phantom, making each landing feel smoother and more professional.

Plus, if you’re a Phantom enthusiast, this mod lets you squeeze even more out of your drone’s performance.

Who designed it? bustmold

Where to find it? thingiverse

2. Retractable Landing Gear for Drone

Ever wanted landing gear that tucks away when you don’t need it? Retractable landing gear is the answer. Imagine: as soon as your drone lifts off, the gear folds up, and when it’s time to land, it neatly drops back down.

This retractable option is fantastic for those who want to add a bit of sci-fi style to their flights. It also gives you a cleaner aesthetic during flight and allows you to avoid anything snagging or getting in the way.

This mod does require a bit more assembly, but it’s worth the extra effort. The retractable gear is especially useful for tight spaces or when flying around obstacles where you don’t want anything hanging off the drone.

The 3D print file for this one includes a smooth mechanism that can be activated with a small motor. Just make sure to follow the assembly instructions closely.

Who designed it? Blaise_fr

Where to find it? thingiverse

3. Shock-Absorbing F450 Landing Gear (Long Legs)

Landing on hard or uneven surfaces can be a rough experience for any drone. If you’re flying an F450, this shock-absorbing landing gear mod is a fantastic upgrade. Think of it as a mini suspension system for your drone.

These long legs absorb some of the impact as you land, reducing the risk of damage and keeping the drone steady.

Not only does this design give you a bit of extra height, but it’s also excellent for outdoor flying where you might encounter rocky or uneven terrain. It’s easy to 3D print, and the shock-absorbing feature is perfect for giving you peace of mind.

With these legs, your drone can take on tougher landings without a scratch, and it’ll be more resilient against any surprise bumps.

Who designed it? fcheshire

Where to find it? thingiverse

4. Phantom 4 Pro Leg Extensions

If you’re a Phantom 4 Pro owner, you know that height can be an issue during landings, especially if there’s debris around. These leg extensions add extra height to the Phantom, keeping the body and camera safely elevated. They’re a straightforward addition that’s both practical and simple to install.

The added height helps keep dirt, grass, and other ground clutter away from your drone’s camera, giving you peace of mind every time you land.

Plus, these extensions are lightweight, so they won’t affect your flight time or add much bulk. It’s a small modification with big benefits.

Who designed it? Achiii

Where to get it: thingiverse

5. DJI Spark GoPro Mount

Want to take your photography to the next level? This DJI Spark mod combines a GoPro mount with landing gear, so you can film with a GoPro while still enjoying the safety of sturdy landing gear.

It’s a cool way to get double the use out of your drone, as you can add high-quality footage from the GoPro while ensuring a stable landing.

This 3D print idea is a bit more advanced in terms of design, but the results are worth it. It adds a bit of flair to your drone and lets you experiment with different camera angles. Just snap on your GoPro, take off, and land smoothly without worrying about stability.

Who designed it? UlrichC

Where to find it? thingiverse

6. Landing Gear for DJI Mini 2 - Updated V2

The DJI Mini 2 is a compact drone with tons of power, but its landing gear isn’t always up to the task. This updated V2 landing gear mod is specifically designed for the Mini 2, adding both stability and height.

With this mod, you can land on almost any surface without worrying about damage to the body or camera.

These extended legs are lightweight, so they won’t compromise the Mini 2’s excellent flight capabilities. It’s a great 3D print project if you’re looking to give your Mini 2 some extra support and ensure smooth landings, even on rough ground.

Who designed it? DIY3DTech

Where to find it? thingiverse

7. DJI FlameWheel Leg Extension

If you’re using a DJI FlameWheel, you know that it’s built for versatility and exploration. Adding leg extensions to the FlameWheel gives it the stability and height it needs for safe landings. This design provides extra clearance from the ground, reducing the risk of dust and debris getting into the sensitive parts of your drone.

This mod is especially handy if you’re flying in unpredictable or outdoor environments. With the additional height, you can fly confidently, knowing that your drone’s bottom and camera are safe from any dirt or grass that might be in the landing zone.

Who designed it? Galda

Where to find it? thingiverse

8. DJI Mavic Air 2 Legs Extended Landing Gear

The Mavic Air 2 is sleek, but its landing gear could use a bit of an upgrade. These extended legs give your Mavic Air 2 some extra height, protecting the camera from dirt and rough surfaces.

It’s a simple yet effective 3D print that takes your Mavic’s landing experience from “meh” to “marvelous.”

These legs are designed to be easy to install and remove, so you can switch them out whenever you need. Whether you’re landing on rocky terrain or just want a smoother touchdown, this mod has you covered.

Who designed it? CULTS PU

Where to find it? cults3d

9. Wide Landing Gear Kit for DJI Phantom

If you need stability over height, a wide landing gear kit is the way to go. This mod provides a broader footprint for your DJI Phantom, making it easier to land on rough or uneven surfaces. With a wider base, your drone will feel as steady as a table, reducing the chances of it tipping over in the wind.

The wide landing gear is ideal if you’re flying in windy conditions or landing in tight spaces where balance is key. The best part? It’s lightweight and won’t affect your flight time, so you get the benefit of stability without any drawbacks.

Who designed it? 3dxl

Where to find it? thingiverse

10. Quadcopter Drone RC Helicopter Automatic Deploying Landing Gear

Fancy a high-tech touch? This automatic deploying landing gear is a cool gadget for any quadcopter or RC helicopter. It deploys automatically as your drone nears the ground, giving you hands-free landings that feel straight out of a sci-fi movie. It’s a great project for those who like a bit of innovation and automation.

Though this mod requires a few more parts and assembly, the automatic deployment makes every landing feel smooth and controlled. It’s perfect for high-tech enthusiasts who want their drones to stand out from the crowd with a feature that’s as functional as it is fun.

Who designed it? H5Labs

Where to find it? thingiverse

11. Simple Flame Wheel Landing Gear for Battery Camera

This one’s for the minimalists. If you’re all about keeping things simple and effective, this landing gear mod for the Flame Wheel holds your battery camera securely and provides a sturdy landing platform. It’s a no-frills design, but it’s tough and reliable, which is sometimes all you need.

Designed to be easy on the 3D printer and quick to assemble, this landing gear mod is perfect if you want functionality without too much fuss. It’s ideal for anyone who just wants a solid, reliable landing without any extra complications.

Who designed it? Michael08468

Where to find it? thingiverse

12. F450 F550 Landing Gear Extender

If you fly an F450 or F550, you know how close the camera can get to the ground. This landing gear extender lifts your drone just enough to keep your camera and gimbal safe from dirt and other debris. It’s especially useful for those who film outdoors, where the ground can be unpredictable.

These extenders are easy to install and don’t add much weight, so your drone’s performance won’t be impacted. With this mod, you can fly with peace of mind, knowing your camera is safe even on rough terrain.

Who designed it? pinakoza

Where to find it? thingiverse

13. DJI F550 Landing Gear

Sometimes, a custom fit is the best solution. This landing gear is designed specifically for the DJI F550, giving it the stability it needs for safe landings. With sturdy legs that handle uneven surfaces with ease, your F550 can land smoothly without wobbling or tipping over.

Printing this landing gear is straightforward, and it’s easy to attach to your F550. If you’re serious about taking care of your drone, this custom gear is a smart investment for reliable, secure landings.

Who designed it? Henry2501

Where to find it? thingiverse

14. DJI Phantom Landing Gear BUSTMOLD LEGS 9cm

Looking to add some height and a unique look to your Phantom? These BUSTMOLD legs extend about 9cm, making them a standout choice for those who want something different. They’re sturdy, easy to install, and give your Phantom a bit more height for safer landings.

The extra height and distinct design make these legs a great choice for anyone who wants their drone to stand out. Plus, they’re practical for keeping your drone’s camera safely elevated from dust or wet surfaces.

Who designed it? bustmold

Where to find it? thingiverse

15. Lightweight Foldable Landing Gear for Drones

Last but definitely not least, foldable landing gear is a space-saving solution that’s perfect for anyone on the go. These legs fold up when not in use, making them easy to transport and store. If you’re constantly moving from place to place, these foldable legs will make life a lot easier.

They’re lightweight and durable, and they’re designed to be compatible with multiple drone models. The foldable feature means you get the best of both worlds: stability when you land, and portability when you’re done.

Who designed it? crumpled

Where to find it? thingiverse

10 Best Crackable Egg STL Files >>

15 Storage Solutions with 3D Printed Shelves >>

Wrapping it Up From extra height to shock absorption to automatic deployment, these 15 innovative 3D print ideas give you endless ways to upgrade your DJI drone’s landing gear. Whether you’re flying a Phantom, Spark, or Mavic, there’s something here for every drone enthusiast. And if you have a Creality 3D printer, these mods are just a few clicks and prints away from being yours.

With options that suit both beginners and advanced users, these landing gear upgrades make every landing smoother and safer. Try out a few and see how they improve your flights—because every great takeoff deserves an equally smooth landing!

Top 15 Innovative DJI Landing 3D Print Ideas

Recent News

Top 10 3D Screen Printing Squeegee Projects

K1 or K1 SE or K1C: What Should You Buy?

How to 3D Print Brass Successfully

Aluminum 3D Printing: All You Need to Know